LENOX Tools - page 47

47
lenoxtools.eu
CARBIDE BAND SAW BLADES
APPLICATION
Aluminum/ Non-Ferrous
Castings
Gates & Risers
Wood
Composites
CAST MASTER
Superior Performance When Sawing Castings
EXCEPTIONAL BLADE LIFE IN HAND FED FOUNDRY APPLICATIONS
Sub-micron grade carbide designed for cutting aluminum
and non-ferrous parts
Precision grind on the rake face prevents material build up on the
tooth edge
CUTS PARTS FREELY WITH LIMITED FEED PRESSURE
Optimized rake angle and narrow kerf enable high speed cutting
without pulling the part
Multi-chip tooth design reduces cutting forces and limits vibration
HIGH ALLOY BACKING STEEL INCREASES FATIGUE LIFE
Advanced backing steel preparation minimizes band breaks
CAST MASTER
XL
Superior Performance in High Speed Aluminum
Cutting Applications
LONG BLADE LIFE AT HIGH BAND SPEEDS
Special grade of carbide is designed to wear slowly when cutting aluminum
Multi-chip tooth pattern balances the chip load and reduces cutting forces
Next generation welding technology reduces premature tooth loss
Exceptional Part Finish at Increased
CUTTING RATES
Precision grind prevents material build up on the tooth edge
Teeth have sharp edges and high rake angles to penetrate
easily and leave a smooth finish
STRAIGHT CUTS IN LARGE BLOCK APPLICATIONS
High alloy backing steel and fatigue resistant gullet geometry minimize the
impact of wide guide spacing
WIDTH X THICKNESS
TPI
IN
MM 2/3
3
3/4
3/4 x .035
19 x 0.90
• * •
1 x .035
27 x 0.90
• *
1-1/4 x .042
34 x 1.07
1-1/2 x .050 41 x 1.27
Multi-chip Design
*
Set Style (Cast Master SST)
WIDTH x THICKNESS
TPI
IN
MM 0.6/0.8 0.9/1.1 1.4/2.0 2/3
1-1/4 x .042
34 x 1.07
1-1/2 x .050
41 x 1.27
• * • *
2 x .063
54 x 1.60
2-5/8 x .063
67 x 1.60
3 x .063
80 x 1.60
*
CAST MASTER XLE
- Spec designed for automated cutting of engine blocks
APPLICATION
Aluminum / Non-Ferrous
Castings
Engine Blocks
Gates & Risers
1...,37,38,39,40,41,42,43,44,45,46 48,49,50,51,52,53,54,55,56,57,...72
Powered by FlippingBook